High Yield Research Articles

Electron-Rich Ru Supported on N-Doped Coffee Biochar for Selective Reductive Amination of Furfural to Furfurylamine.

Highly selective synthesis of primary amines from renewable biomass has attracted increasing attention, but it still faces great challenges in chemical industry applications. In this study, an electron-rich Ru catalyst was constructed by doping N into coffee biochar using a one-pot carbonization method (Ru/NCB-600). Ru/NCB-600 showed high catalytic activity and yield for the reductive amination of furfural with green and cheap NH3 and H2. The excellent catalytic performance of Ru/NCB-600 was closely correlated to the formation of electron-rich Ruδ- species (Ruδ--Nxδ+), which endowed Ru/NCB-600 with an enhanced H2 adsorption and activation ability. Ru/NCB-600 showed a high formation rate of 95.6 gfurfurylamine·gRu-1·h-1 and a high yield of furfurylamine (98.6%) at 50 °C. Ru/NCB-600 can also be used for the reductive amination of various carbonyl compounds in good to excellent yield (95.4-99%). This study thus provides a potential pathway for the highly selective reductive amination of carbonyl compounds by regulating the electron density of Ru.

Genetic diagnosis and detection rates using C9orf72 repeat expansion and a multi-gene panel in amyotrophic lateral sclerosis.

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disorder. It is mostly sporadic, with the C9orf72 repeat expansion being the most common genetic cause. While the prevalence of C9orf72-ALS in patients from different populations has been studied, data regarding the yield of C9orf72 compared to an ALS gene panel testing is limited.We aimed to explore the application of C9orf72 versus a gene panel in the general Israeli population. A total of 140 ALS patients attended our Neurogenetics Clinic throughout 2018-2023. Disease onset was between ages 60 and 69years for most patients (34%); however, a quarter had an early-onset disease (< 50years). Overall, 119 patients (85%) were genetically evaluated: 116 (97%) were tested for the C9orf72 repeat expansion and 64 (54%) underwent gene panel testing. The C9orf72 repeat expansion had a prevalence of 21% among Ashkenazi Jewish patients compared to 5.7% in non-Ashkenazi patients, while the gene panel had a higher yield in non-Ashkenazi patients with 14% disease-causing variants compared to 5.7% in Ashkenazi Jews. Among early-onset ALS patients, panel testing was positive in 12% compared to 2.9% for C9orf72.We suggest a testing strategy for the Israeli ALS patients: C9orf72 should be the first-tier test in Ashkenazi Jewish patients, while a gene panel should be considered as the first step in non-Ashkenazi and early-onset patients. Tiered testing has important implications for patient management, including prognosis, ongoing clinical trials, and prevention in future generations. Similar studies should be implemented worldwide to uncover the diverse ALS genetic architecture and facilitate tailored care.

Plasmon-emitter coupling in cytosine-rich hairpin DNA-templated silver nanoclusters: Thermal reversibility, white light emission, and dynamics inside live cells.

Bio-templated luminescent noble metal nanoclusters (NCs) have attracted great attention for their intriguing physicochemical properties. Continuous efforts are being made to prepare NCs with high fluorescence quantum yield (QY), good biocompatibility, and tunable emission properties for their widespread practical applications as new-generation environment-friendly photoluminescent materials in materials chemistry and biological systems. Herein, we explored the unique photophysical properties of silver nanoclusters (AgNCs) templated by cytosine-rich customized hairpin DNA. Our results indicate that a 36-nucleotide containing hairpin DNA with 20 cytosine (C20) in the loop can encapsulate photostable red-emitting AgNCs with an absolute QY of ∼24%. The luminescent properties in these DNA-templated AgNCs were found to be linked to the coupling between the surface plasmon and the emitter. These AgNCs exhibited excellent thermal sensitivity and were employed to produce high-quality white light emission with an impressive color rendering index of 90 in the presence of dansyl chloride. In addition, the as-prepared luminescent AgNCs possessing excellent biocompatibility can effectively mark the nuclear region of HeLa cells and can be employed as a luminescent probe to monitor the cellular dynamics at a single molecular resolution.

Characteristics of the existing methods for obtaining carotenes from carotenoid concentrates

Carotenes, which simultaneously have the properties of natural dyes and biologically active substances that have a positive effect on human health and life expectancy, are becoming increasingly widespread in the food, pharmacological and cosmetic industries. This necessitates an increase in the production of carotenes on an industrial scale. For use in food technologies, an encapsulated form of carotenes is recommended, which requires their high purity. The purpose of this study is to analyze domestic and foreign scientific, technical and patent information on existing methods for obtaining carotenes from carotenoid concentrates to determine the direction of research for the development of technology for the production of carotenes, in particular lycopene, ensuring the production of high purity lycopene from carotenoid concentrates, as well as increasing release of lycopene. The issues of using chromatographic methods for isolating lycopene, their advantages and disadvantages, as well as the use of non-polar and low-polar organic solvents for isolating lycopene from carotenoid concentrate are considered. The promising direction of research on the use of adsorption resins in the isolation of lycopene from carotenoid concentrates is noted.It has been concluded that the currently existing methods for obtaining carotenes from carotenoid concentrates, in particular lycopene, are quite technically complex and time-consuming. Some of the mallow the production of high purity lycopene, but the yield of lycopene is so low that their industrial scaling seems impractical. Taking this into account, research is being updated in the field of developing a technology for producing lycopene from a carotenoid concentrate, providing a high yield of high purity lycopene, with the possibility of its implementation on an industrial scale.

Palladium‐Catalyzed Inward Isomerization Hydroaminocarbonylation of Alkenes

In contrast to the kinetically favored outward isomerization‐hydrocarbonylation of alkenes, the disfavored inward isomerization‐hydrocarbonylation of alkenes remains an important challenge. Herein, we have developed a novel and effective palladium‐catalyzed inward isomerization‐hydroaminocarbonylation of unactivated alkenes and aniline hydrochlorides for the formation of synthetically valuable α‐aryl carboxylic amides in high yields and high site‐selectivities. The high efficiency of the reaction is attributed to a relay catalysis strategy, in which the Markovnikov‐favored [PdH]‐PtBu3 catalyst is responsible for inward isomerization, while the [PdH]‐Ruphos catalyst is responsible for hydroaminocarbonylation of the resulting conjugated aryl alkenes. The reaction exhibits highly functional group tolerance and provides a new method for formal carbonylation of remote C(sp3)‐H bond.

Organocatalytic Asymmetric Conjugate Addition of Fluorooxindoles to Quinone Methides.

Fluorooxindoles undergo asymmetric Michael addition to para-quinone methides under phase-transfer conditions with 10 mol% of a readily available cinchona alkaloid ammonium catalyst. This reaction affords sterically encumbered, multifunctional fluorinated organic compounds displaying two adjacent chirality centers with high yields, ee's and dr's.

Palladium-Catalyzed Inward Isomerization Hydroaminocarbonylation of Alkenes.

In contrast to the kinetically favored outward isomerization-hydrocarbonylation of alkenes, the disfavored inward isomerization-hydrocarbonylation of alkenes remains an important challenge. Herein, we have developed a novel and effective palladium-catalyzed inward isomerization-hydroaminocarbonylation of unactivated alkenes and aniline hydrochlorides for the formation of synthetically valuable α-aryl carboxylic amides in high yields and high site-selectivities. The high efficiency of the reaction is attributed to a relay catalysis strategy, in which the Markovnikov-favored [PdH]-PtBu3 catalyst is responsible for inward isomerization, while the [PdH]-Ruphos catalyst is responsible for hydroaminocarbonylation of the resulting conjugated aryl alkenes. The reaction exhibits highly functional group tolerance and provides a new method for formal carbonylation of remote C(sp3)-H bond.

Heterogeneous nucleation optimization from AgCl and reduction control in ethylene glycol for fast and reproducible synthesis of silver nanowires

Silver nanowires synthesized by the most commonly used polyol method are typically accompanied by nanoparticles and nanorods, which have a negative impact on the performance of silver nanowire-based devices. Herein, we report a reproducible and easy method for preparing silver nanowires with yields exceeding 70% by optimizing the heterogeneous nucleation of silver from silver chloride precursors and regulating the reduction in ethylene glycol. The yield of silver nanowires depended on the morphology and concentration of silver chloride and the decomposition time of ethylene glycol. The Raman spectra were used to study the effect of the decomposition time of ethylene glycol on the concentration of acetaldehyde in solution, which influenced the reduction rate of silver ions. Then, the reaction time of silver nanowires was further reduced from 24 min to 10 min by increasing the reaction temperature from 160 °C to 170 °C. On the basis, the silver nanowire based capacitive screen with a good capacitive response and anti-aging performance was further fabricated. This method provides a new way for the macro preparation of silver nanowires with high yields.

The Laccase Catalysed Tandem Lignin Depolymerisation/Polymerisation.

The development of strategies allowing either the production of high value phenolics, or the isolation of properties-enhanced materials from technical lignins represents a fundamental step in the industrial upcycling of technical lignins. Both aims are met by the strategy presented in the present work, relying on the coupling of solvent-based fractionation with the oxidative action of a new type of alkaline-stable genetically modified bacterial laccase. The described approach succeeded in the tandem, high-yield and selective isolation of valuable lignin-monomeric compounds (MCs) and high molecular weight and hydrophobicity-tailored polymerised materials (PMs) from two technical lignins, namely softwood kraft lignin (SKL), and wheat straw organosolv lignin (WSL). With respect to MCs, higher yields as compared to similar studies (up to 17.2 mg/g) were achieved. PMs from SKL samples where characterised by an almost quadrupled Mw, while in the case of WSL the Mw was approximately doubled. Noteworthy, the reaction conditions were optimized in terms of reaction temperature, time, enzymatic loading, and alkalinity for the selective production of single MCs. Most interestingly, technical lignins as well as their fractions and the PMs deriving from their laccase-catalysed oxidation showed increased hydrophobicity.

Strongly-Confined CsPbBr3 Perovskite Quantum Dots with Ultralow Trap Density and Narrow Size Distribution for Efficient Pure-Blue Light-Emitting Diodes.

The development of pure-blue perovskite light-emitting diodes (PeLEDs) faces challenges of spectral stability and low external quantum efficiency (EQE) due to phase separation in mixed halide compositions. Perovskite quantum dots (QDs) with strong confinement effects are promising alternatives to achieve high-quality pure-blue PeLEDs, yet their performance is often hindered by the poor size distribution and high trap density. A strategy combining thermodynamic control with a polishing-driven ligand exchange process to produce high-quality QDs is developed. The strongly-confined pure-blue (≈470nm) CsPbBr3 QDs exhibit narrow size distribution (12% dispersion) and are achieved in Br-rich ion environment based on growth thermodynamic control. Subsequent polishing-driven ligand exchange process removes imperfect surface sites and replaces initial long-chain organic ligands with short-chain benzene ligands. The resulting QDs exhibit high photoluminescence quantum yield (PLQY) to near-unity. The resulting PeLEDs exhibit a pure-blue electroluminescence (EL) emission at 472nm with narrow full-width at half-maximum (FWHM) of 25nm, achieving a maximum EQE of 10.7% and a bright maximum luminance of 7697cdm-2. The pure-blue PeLEDs show ultrahigh spectral stability under high voltage, a low roll-off of EQE, and an operational half-lifetime (T50) of 127min at an initial luminance of 103cdm-2 under continuous operation.

Collagen derived from a giant African snail (Achatina achatina) for biomedical applications

Achatina achatina (AA) is a rich source of collagen due to its large size, but it is underutilized. Type I collagen was extracted from AA to serve as an alternative to existing collagen sources. The collagen was extracted at varying alkaline and temperature conditions to determine the optimal parameters that would give a high yield of acid-soluble collagen. The extracted collagen was characterised using X-ray diffraction, Fourier transform infrared (FTIR) spectrometry, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to confirm the integrity and purity of the extracted collagen. The type of collagen was determined using sodium dodecyl sulphate-polyacrylamide gel electrophoresis. The α-1, α-2, and dimer electrophoresis bands confirmed that the collagen is type I, and the XRD data supported the findings. The highest collagen yield was obtained at 4 ℃ for 48 h, which decreased with increasing temperature due to the instability of the protein in acid at high temperatures. A cytotoxicity test was conducted using an Alamar blue assay. The AA collagen-treated normal prostate cell line (PNT2) showed no significant difference from the untreated control cells. The high-quality type I collagen extracted from AA has the potential for biomedical and other industrial applications.

Subchronic Toxicity Evaluation of Idesia polycarpa Fruit Oil by 90-Day Oral Exposure in Wistar Rats.

Idesia polycarpa, belonging to the Flacourtiaceae family, is a tall deciduous tree, widely distributed in some Asian countries. It is famous for its high yield of fruit known as oil grape, which is rich of linoleic acid and linolenic acid, and so on. To provide evidences for its safe use as food, subchronic toxicity of I. polycarpa fruit oil and no observed adverse effect level were performed in male and female specific pathogen-free Wistar rats. Based on the Organization for Economic Co-operation and Development guidelines, the oil was orally administered to rats by gavage at 0, 1.0, 2.0, and 4.0mL/kg.bw/day for 90 days, followed by a 28-day recovery period. The results showed that no sign of oil-related toxicity, clinically or histologically, was observed in both male and female rats. Although there was a slight increase or decrease in some indicators such as hematology, serum chemistry, and so on, those changes were all within the normal ranges, and as presented in the 90-day study, the oil exhibited no toxic effect compared to the control rats. I. polycarpa might be a potential excellent and healthy vegetable oil resource.

Extraction of high quality and high yield RNA from frozen EDTA blood.

Peripheral blood RNA profiling, which can reveal systemic changes in gene expression and immune responses to disease onset and progression, is a powerful tool for diagnosis and biomarker discovery. This technique usually requires high quality RNA, which is only obtainable from fresh blood, or frozen blood that has been collected in special RNA-stabilisation systems. The current study aimed to develop a novel protocol to extract high quality RNA from frozen blood that had been collected in the conventional EDTA tubes. We determined that thawing EDTA blood in the presence of cell lysis/RNA stabilisation buffers (Paxgene or Nucleospin) significantly improved RNA quality (RIN) from below 5 to above 7, which to date has not been shown possible. The EDTA-Nucleospin protocol resulted in 5 times higher yield than the EDTA-Paxgene-PreAnalytix method. The average RIN and mRNA expression levels of five different genes including 18s, ACTB, MCP1, TNFa and TXNIP using this protocol were also indifferent to those from Paxgene blood, suggesting similar RNA quality and blood transcriptome. Moreover, the protocol allows DNA to be extracted simultaneously. In conclusion, we have developed a practical and efficient protocol to extract high quality, high yield RNA from frozen EDTA blood.

GROWTH AND YIELD RESPONSES OF RED AMARANTH TO LOCALLY SOURCED LIQUID MANURE

The experiment was conducted at Horticultural farm, Sher-e-Bangla Agricultural University, Dhaka, Bangladesh during the period of September to November 2023. The experiment was laid out with single factor experiment using a completely randomized design with three replications to study the Growth and Yield responses of Red Amaranth (Amaranthus cruentus L) to liquid manure. The treatments under this study were; T1: Control (Only Water), T2: Vermi Tea; T3: SAU- MLM, T4: SAU-NLM, T5: SAU-PLM. Significant variation of growth and yield parameters were found among the treatments. Among the treatments. The tallest plant (44.3 cm), maximum root length was (13.3cm), maximum leaf area (38.2 sq. cm), maximum leaf number (14.0), maximum fresh weight per plant (22.1g), highest weight of plants per 506.25 sq. cm (274.9 g) and highest yield per ha (54.3 ton) was found in T5 while shortest plant (25.1 cm, minimum root length (4.8cm), minimum leaf area (16.4 sq. cm), minimum leaf number (8.6), minimum weight of plants/506.25 sq.cm. (77.5 g) and the lowest yield per ha (15.6 t) was found in T1 at final harvest (30 days after showing). Considering the overall analysis, it becomes evident that T5 consistently exhibits superior outcomes when compared to the other treatments. The superior performance of T5 suggests that it could be the optimal choice for maximizing agricultural productivity while maintaining a focus on human well-being and environmental sustainability. This treatment option not only results in higher yields, indicating potential economic benefits, but it also contributes to the overall safety and health considerations for individuals involved in the agricultural processes.

Enabling Logistics Automation in Nanofactory: Cobalt Phosphide Embedded Metal-Organic Frameworks for Efficient Electrocatalytic Nitrate Reduction to Ammonia.

Electrocatalytic nitrate reduction reaction (NitRR) in neutral condition offers a promising strategy for green ammonia synthesis and wastewater treatment, the rational design of electrocatalysts is the cornerstone. Inspired by modern factory design where both machines and logistics matter for manufacturing, we report that cobalt phosphide (CoP) nanoparticles embedded in zinc-based zeolite imidazole frameworks (Zn-ZIF) function as a nanofactory with high performance. By selective phosphorization of bimetallic ZnCo-ZIF, the generated CoP nanoparticles act as "machines" (active sites) for molecular manufacturing (NO3 - to NH4 + conversion). The purposely retained framework (Zn-ZIFs) with positive charge promotes logistics automation, i.e., the automatic delivery of NO3 - reactants and timely discharge of NH4 + products in-and-out the nanofactory due to electrostatic interaction. Moreover, the interaction between Zn-ZIF and CoP modulates the Co sites into electron insufficient state with upshifted d-band center, facilitating the reduction/hydrogenation of NO3 - to ammonia and restricting the competitive hydrogen evolution. Consequently, the assembled CoP/Zn-ZIF nanofactory exhibits superior NitRR performances with a high Faraday efficiency of ≈97% and a high ammonia yield of 0.89mmol cm-1 h-1 in neutral condition, among the best of reported electrocatalysts. Our work provides new insights into the design principles of efficient NitRR electrocatalysts. This article is protected by copyright. All rights reserved.

Effects of Pulsed Electric Field on Oil Extraction Rate and Tocopherol in Peony Seeds

Peony seed oil, known for its high nutritional value and low production yield, has become a crucial component in high-quality health products. Consequently, enhancing the extraction efficiency of peony seed oil has become an industry objective. Pulse electric field (PEF) technology, as a non-thermal extraction method, has shown promising advancements in improving plant oil yield by enhancing cell permeability. In this study, we designed a static parallel plate PEF treatment unit to process peony seed particles. By manipulating pulse voltage parameters, we investigated the effects of particle size and PEF strength on the oil yield. We also analyzed and evaluated tocopherol in the oil before and after treatment. The results demonstrated that PEF significantly increased the oil yield. Both treated and control groups exhibited gradually increased oil yields with decreasing particle size until reaching saturation at a certain particle size. Increasing voltage frequency did not have a significant impact on the oil yield; however, increasing voltage amplitude resulted in an optimal point for maximum oil yield. Analysis of oil composition indicated that PEF appropriately increased tocopherol content. These findings provide a foundation for further optimization of PEF parameters to assist in extracting peony seed oil and facilitate its industrial application.

Energy‐Level Alignment and Electronic Structure of Dual‐State Luminogens Thin Films

Organic dual‐state emitters show high quantum yields of luminescence in both solution and the aggregated state. Alkyl side chains are frequently used to engineer solid‐state structures and prominent examples are naphthalimide‐functionalized cyanostilbene derivatives (NICS‐X), where H‐aggregation takes place for ethoxyl substitution (NICS‐E), while methoxyl and butoxyl substitution (NICS‐M and NICS‐B) lead to the quasi‐isolated Q‐type structure. While this takes place for powder samples, vacuum‐sublimed thin films are used, and it is shown by photoluminescence (PL) measurements that H‐aggregation takes place for all three NICS derivatives. In contrast, the energy‐level alignment of NICS‐X films on graphite exhibits disparities as shown by photoelectron spectroscopy: pronounced disorder in NICS‐B films leads to energy‐level bending, while the energy levels of NICS‐M and NICS‐E films remain flat. In such a way, it is demonstrated that side‐chain engineering of luminogens affects the short‐range order (responsible for the PL) and the long‐range order (responsible for the energy‐level alignment) in different ways. Furthermore, the importance of a substrate (thin films vs powder) on the solid‐state aggregation is highlighted.

Effects of nitrogen fertilization rate and seeding density on the forage yield and quality of autumn‐sown triticale in an alpine grazing area of the Qinghai‐Tibetan Plateau, China

Abstract‘Gannong No. 2’ triticale (×Triticosecale Wittmack) is a cold‐resistant annual forage crop variety, which can be planted as artificial pasture to solve the problem of forage shortage in the Gannan alpine grazing area of the Qinghai‐Tibetan Plateau. However, the optimal nitrogen fertilization rate and seeding density for obtaining high yield and quality forage are still unknown. In this study, the effects of nitrogen fertilization rate and seeding density on the forage yield and quality of autumn‐sown ‘Gannong No. 2’ triticale were studied. We used a split‐plot design, with five nitrogen fertilization rates assigned to the main plots, namely 0 (A1), 120 (A2), 240 (A3), 360 (A4), and 480 kg N ha−1 (A5), and five seeding densities assigned to subplots: 506 × 104 (B1), 675 × 104 (B2), 843 × 104 (B3), 1011 × 104 (B4), and 1180 × 104 seeds ha−1 (B5). Significant differences in lodging rate, tiller number, hay yield, crude protein content, neutral detergent fibre, and relative feed value were observed at different fertilization levels. Significant differences were found in lodging rate, plant height, tiller number, hay yield, contents of neutral detergent fibre and acid detergent fibre, dry matter digestibility, and relative feed value among the seeding density treatments. The interaction of nitrogen fertilization rate and seeding density significantly affected forage yield and quality, with the A3B3 treatment having the highest comprehensive evaluation value. In alpine grazing areas of the Qinghai‐Tibetan Plateau, 240 kg N ha−1 and 843 × 104 seeds ha−1 should therefore be used for autumn‐sown triticale.

Effects of Water and Nitrogen Control on the Growth Physiology, Yields, and Economic Benefits of Lycium barbarum Plants in a Lycium barbarum + Alfalfa System

In the production of economic forests, there are common issues such as excessive application of water and fertilizer, redundant plant growth, and low economic benefits. Reasonable water and fertilizer management can not only help address these problems but also improve the absorption and use efficiency of water and fertilizer resources by plants, promoting the green and efficient development of the fruit and forestry industry. In order to explore a suitable water and nitrogen management mode for Lycium barbarum, field experiments were conducted in this study from 2021 to 2022. Specifically, four irrigation modes (according to the proportion ratio of soil moisture content to field moisture capacity θf, 45–55% θf(W1, severe water deficiency), 55–65% θf(W2, moderate water deficiency), 65–75% θf(W3, mild water deficiency), and 75–85% θf(W4, sufficient irrigation)) and four nitrogen application levels (0 kg·ha–1 (N0, no nitrogen application), 150 kg·ha–1 (N1, low nitrogen application level), 300 kg·ha–1 (N2, medium nitrogen application level), and 450 kg·ha–1 (N3, high nitrogen application level)) were set up to analyze the influences of water and nitrogen control on the plant height, stem diameter, chlorophyll content, photosynthetic characteristics and yield, and economic benefits of Lycium barbarum in the Lycium barbarum + Alfalfa system. The study results show that the plant height and stem diameter increment of Lycium barbarum increase with the irrigation amount, increasing first and then decreasing with the increase in the nitrogen application level. Meanwhile, the chlorophyll contents in Lycium barbarum continuously increase throughout their growth periods, with Lycium barbarum treated with W4N2 during all growth periods presenting the highest contents of chlorophyll. In a Lycium barbarum + Alfalfa system, the daily variation curve of the Lycium barbarum net photosynthetic rate presents a unimodal pattern, with maximum values of the daily average net photosynthetic rate and daily carboxylation rate appearing among W4N2-treated plants (19.56 μmol·m–2·s–1 and 157.06 mmol·m–2·s–1). Meanwhile, the transpiration rates of Lycium barbarum plants continuously decrease with the increased degree of water deficiency and decreased nitrogen application level. W1N2-treated plants exhibit the highest leaf daily average water use efficiency (3.31 μmol·s–1), presenting an increase of 0.50–10.47% in efficiency compared with plants under other treatments. The coupling of water and nitrogen has significantly improved the yields and economic benefits of Lycium barbarum plants, with W4N2-treated and W3N2-treated plants presenting the highest dried fruit yield (2623.07 kg·ha–1) and net income (50,700 CNY·ha–1), respectively. Furthermore, compared with other treatment methods, these two treatment methods (W4N2 and W3N2) exhibit increases of 4.04–84.08% and 3.89–123.35% in dried fruit yield and net income indexes, respectively. Regression analysis shows that, in a Lycium barbarum + Alfalfa system, both high yields and economic benefits of Lycium barbarum plants can be achieved using an irrigation amount of 4367.33–4415.07 m3·ha–1 and a nitrogen application level of 339.80–367.35 kg·ha–1. This study can provide a reference for improving the productivity of Lycium barbarum plants and achieving a rational supply of water and nitrogen in Lyciun barbarum + Alfalfa systems in the Yellow River Irrigation Area of Gansu, China, and other similar ecological areas.

Effect of Plant Spacing and Nutrient Levels on Growth and Yield of Red Cabbage (Brassica oleracea var. capitata f. rubra)

An experiment was conducted to investigate the impact of plant spacing and nutrient levels on the growth and yield of red cabbage. This experiment involved three distinct spacing configurations (45cmx30cm, 45cmx45cm, and 45cmx60cm) and nutrient levels (75% NPK, 100% NPK, and 125% NPK). The experiment was designed as a Factorial Randomized Block Design (FRCBD) and carried out at the Department of Horticulture, University of Agricultural Sciences, GKVK, Bengaluru, during the 2021-22 period. This study infers that spacing and nutrients promote the vegetative growth of plants. The spacing configuration of 45cm X 60cm with 125% NPK resulted in the most significant outcomes, including the highest number of leaves (28.93), maximum plant height (36.71 cm), maximum fresh weight of the head (1421.80 g) and highest head volume (1360.19 cc) which could be because of wider spacing and higher nutrient doses. Conversely, the spacing configuration of 45cm X 30cm with 75% NPK demonstrated the early head initiation (45.60 days) and the most compact head formation (0.38). The highest yield per hectare (74.43 t) was achieved with the spacing configuration of 45cmx30cm using 125% NPK which improved greater availability of nutrients and, as a result, boosted the vegetative development.